65 ton four column hydraulic press price
65 ton four column hydraulic press price
Name: 65 tons of four-column hydraulic press, 65 tons of four-column double-action hydraulic press, 65 tons of hydraulic press
Brand: Chengda hydraulic
Model: YB32-65T four-column hydraulic press
The 65-ton four-column hydraulic press is widely used in hardware, gold ornaments, glasses, abrasive wheels, electrical appliances, embossing, lamination, metal plates, watch straps (cases, bottoms), plastic rubber and other industries for molding products. Another series of hydraulic presses can be produced according to customers' requirements, such as pressure-holding type and releasing device, which can be used for heating, shaping and automatic demoulding of processed products in the industries of grinding wheel, case, metal plate, plastic and rubber, etc. Automatic vulcanizing presses can also be produced with primary to secondary air release devices.
65 tons four-column hydraulic press structure: It consists of upper beam, slider, worktable, column, main cylinder, hydraulic power system and electrical system. The upper beam, slider and working table are welded with high quality steel plates and treated by vibration aging to eliminate the internal stress, and the four columns are quenched at medium frequency and chromium plated.
1、The plunger of the lower cylinder is changed to hard chromium-plated steel parts with wear-resistant ring structure, which avoids the problem of plunger crumbling.
2、The seal ring of the lower cylinder adopts imported combination ring, which can be used for more than fifteen years without replacement.
3、The column and piston rod are heat-treated by medium frequency, and the surface is plated with hard chrome.
4、The receding cylinder can be controlled separately by pointing.
5、The hydraulic system adopts cartridge valve, cartridge valve channel is large, large flow, fast speed, low noise, low heat generation. 6、The electrical control is changed to microcomputer type single chip, the advantage of this system is the safety control voltage of 24V, there is no intermediate relay, no contact inside, the whole computer chip has high stability, long service life and simple operation.
7、Large range of grating safety protection device.
8、The main cylinder and crimping cylinder have upper and lower limit protection, upper and lower limit range protection, upper and lower limit range position setting is simple, convenient and fast.
9、Safety protection device, automatic counting function. Low energy consumption, high efficiency, novel machine model.
How to solve the problem of corrosion of the cooler of the four-column hydraulic press
Four-column hydraulic press installed cooler, the machine plays a very important role, because the hydraulic press is often a long time intensive work, the body temperature is too high, and once the machine temperature is too high will cause a variety of failures, affecting business production, in order to avoid such a situation people installed on the four-column hydraulic press cooler, cooler can be four-column hydraulic press occurs in the high temperature compressed air cooling, in addition to a lot of compressed air Water. And in the long time use, found the phenomenon of cooler corrosion, what is the reason?
The main reason for corrosion is the material, environment (water quality, gas) and electrochemical reaction of the three major elements, the choice of corrosion-resistant materials, is an important measure to prevent corrosion. The current tubular oil cooling with good heat dissipation of copper tube production, its ionization tendency is stronger, will produce contact corrosion due to different heavy metal contact. In addition, the environment of the cooler contains dissolved oxygen, the quality of cooling water, temperature, flow rate and foreign objects.
Chengda hydraulic brand: 65 tons four-column hydraulic press, 65 tons hydraulic press
The 500-ton frame hydraulic press is suitable for: hardware, gold ornaments, glasses, grinding wheels, electrical appliances, embossing, lamination, metal plates, watch bands (cases, bottoms) plastic rubber and other industries products forming with. In addition, we can produce pressure-holding type and withdrawal device series hydraulic presses according to customers' requirements, which are suitable for heating, shaping and automatic demoulding of processed products in the industries of grinding wheel, case, metal plate, plastic and rubber, etc. We can also produce automatic vulcanizing presses with primary to secondary air release devices.