Foshan hydraulic press brand: the west tile forming hydraulic press machine hydraulic press

Times: 2019-11-30

Foshan hydraulic press brand: the west tile forming hydraulic press machine hydraulic press

Name: 100 tons west tile forming hydraulic press, four column forming hydraulic press

Brand: Chengda Hydraulic.

Model: YB31-100C West tile forming hydraulic press

Basic information

100 tons of tile forming hydraulic press (hydraulic press) is a special hydraulic oil as the working medium, through the hydraulic home as a power source, by the force of the pump to make the hydraulic oil through the hydraulic pipeline into the cylinder, and then the cylinder piston has several groups of seals with each other, the seals in different positions are different, but all play a sealing role, so that the hydraulic oil can not leak, and finally through the one-way valve to make the hydraulic oil in the tank Finally, through the check valve, the hydraulic oil is circulated in the oil tank, so that the cylinder piston can do work to complete a certain mechanical action as a kind of productivity machinery.

Product description

The 100-ton tile forming hydraulic press is mainly used for wet clay material mold pressing forming process of various western tiles, Chinese tiles (glass tiles), Japanese tiles and other roof tile series. This series of products have been optimized and innovated for many times, featuring high working efficiency, low energy consumption, easy operation, smooth working and safety, etc.

Product features

1、Pressure and stroke can be adjusted according to the pressing process.

2、With feeding and releasing materials, automatic material pickup, high efficiency of production automation.

3、The oil tank adopts full sealing design, with strong anti-fouling ability and longer service life.

4、Applicable to single and double station mold operation.

5、PLC control is adopted.

Solution for oil leakage:

1、Check whether the hole cover of CNC hydraulic press is too thin and easily deformed after tightening the bolt, touching the gap to leak oil;

2、During the operation of CNC hydraulic press, the oil tank is stirred very violently, and the lubricant is splashed everywhere in the CNC hydraulic press. If there is too much oil, a large amount of lubricant will accumulate in the shaft seal, contact surface, etc., causing leakage;

3、No return tank on the hydraulic tank body, and the lubricant is stored in the shaft seal, end cover, contact surface, etc. and leaks freely from the ground under the action of pressure difference;

4、Improper maintenance technology of CNC hydraulic press: during the maintenance of the equipment, the oil leakage may be caused by incomplete removal of dirt from the contact surface or improper selection of sealant, reversal of sealing direction and untimely replacement of seal;

5. In the production process of CNC hydraulic press, the relevant castings are not annealed or aged, which will not eliminate the internal stress. After long-term use, the fire will inevitably be deformed, leading to idling and resulting in oil leakage.

Chengda hydraulic brand: 100t tons of west tile forming hydraulic press, four column forming hydraulic press